Step 3
Remove 1 screw at Rectifier Diode (D5801).
Step 4
Remove the Rectifier Diode (D5801) from the SMPS
P.C.B..
Caution: Avoid touching the Heatsink B due to its high
temperature after prolonged use. Touching it may lead to
injuries.
11.18.2. Assembly of Rectifier Diode
(D5801)
Step 1
Apply grease to the Heatsink B.
Step 2
Screw the Rectifier Diode (D5801) to the Heatsink B.
Caution: Ensure the Rectifier Diode (D5801) is tightly
screwed to the Heatsink B.
Step 3
Fix the Heatsink B with Rectifier Diode (D5801) on
SMPS P.C.B. as shown.
Caution: Ensure pins of the Rectifier Diode (D5801) is
properly seated on the SMPS P.C.B.
Step 4
Solder pins of the Rectifier Diode (D5801) on the solder
side of SMPS P.C.B..
Step 5
Solder pins of the Heatsink B..
50
Summary of Contents for SA-AKX34LM-K
