Panasonic S-LINK V, User Manual

Page: 73 / 182

73
Chapter 4
Specifications
● Connector number setting switches
Be sure to set the PLC I/O connector numbers.
Each PLC I/O connector number will be determined from the sum total of the values set by the connector num-
ber setting switches.
The connector number setting range is 0 to 15.
The relation between the PLC I/O connector numbers and the I/O unit addresses are shown in the following table.
One control cable can control up to 8 PLC I/O connectors. To control 9 or more PLC I/O con-
nectors, use 2 control cables so that the number of connectors for each cable can be 8 or less.
NOTE
<Example: Setting of PLC I/O connector numbers>
Connector number setting switches PLC I/O connector number S-LINK V I/O unit address
1 2 4 8
ON
0 0 to 31
1 2 4 8
ON
1 32 to 63
1 2 4 8
ON
2 64 to 95
1 2 4 8
ON
3 96 to 127
1 2 4 8
ON
4 128 to 159
1 2 4 8
ON
5 160 to 191
1 2 4 8
ON
6 192 to 223
1 2 4 8
ON
7 224 to 255
1 2 4 8
ON
8 256 to 287
1 2 4 8
ON
9 288 to 319
1 2 4 8
ON
10 320 to 351
1 2 4 8
ON
11 352 to 383
1 2 4 8
ON
12 384 to 415
1 2 4 8
ON
13 416 to 447
1 2 4 8
ON
14 448 to 479
1 2 4 8
ON
15 480 to 511