
69
Chapter 3
Starting
Mode setting
Operation
Description / Function
Indication
Setting of display to decimal / hexadecimal number display
Press key.
Displays the code of the decimal / hexadecimal number set-
ting.
e.g.)
Press ENTER key.
Blinks the displayed code of the decimal / hexadecimal num-
ber setting.
Decimal num-
ber
display
Press key or key.
Selects either the decimal or hexadecimal number display.
Hexadecimal
number display
Press ENTER key.
Determines the display.
If the hexadecimal number display is selected, the hexa-
decimal number display mode indicator will light up.
e.g.)
System setting
Press key.
Displays the code of the system setting.
Press and hold ENTER key
until the displayed code
flashes (for 3 seconds).
Enters the system setting (blinks).
e.g.)
Alternately displays the number of connected PLC I/O con-
nectors and the number of connected nodes (number of con-
nected I/O units).
If 2 PLC I/O
connectors are
connected:
If 4 I/O units
are connected:
End
Default setting
Press key.
Displays the code of the default setting mode.
Press and hold ENTER key
(for 3 seconds).
Displays the indicator check pattern, and sets the default val-
ues.
Sets the items to the initial conditions (default values) in the
CONFIG mode.
Clears the addresses of all the units specified in the system setting.
End
Controller setting default values (values set in our factory before delivery:)
Transmission mode
Number of I/O control
points
Error 1 output
operation
Error 2 output
operation
Error 3 output
operation
Error 4 output
operation
Error 5 output
operation
Decimal / Hexadecimal
number display
Summary of Contents for S-LINK V
