Panasonic S-3650PF3E, Technical Data & Service Manual

Page: 306 / 321

8 8
Setting Item Operation Button Setting Content
Remote Controller
Display
Remote controller
operation mode
display setting when
is pressed
Press while
pressing
Heat Pump
(with Auto)
Heat Pump
(without Auto)
Dedicated air
conditioner
Clock display setting
Press while
pressing
24-hour
AM/PM
Max possible
temperature setting
in the Heat mode
Press while
pressing
Maximum heating
temperature range
is 26 °C – 30 °C
Operation mode indicator, time display (24 hour, AM/PM), heating maximum temperature
These settings are saved in nonvolatile memory in the remote controller, so even when its batteries are changed, the settings
do not have to be made again.
First check the display of the remote controller when the unit is stopped and then make any desired settings.
How to Operate
•
While holding down the buttons below, the remote controller’s display changes every time is pressed.
•
Whatever is being displayed when you release is set.
A variety of changes can be made to settings, depending on the indoor unit being used.
8-2-1-11. Miscellaneous Settings
You can enable or disable the following buttons for some indoor units.
nanoe™ X, ECONAVI, Ventilation, Energy saving
1. Press the button for desired setting for 4 seconds or longer.
• You can toggle between enable and disable each time you press
the button for 4 seconds or longer.
• “ ” is displayed when you press a disabled button, and the
function cannot be used.
Buttons Setting content
nanoeX
Enabling or disabling the button for nanoe™ X.
ECONAVI
Enabling or disabling the button for ECONAVI.
Enabling or disabling the button for ventilation.
Enabling or disabling the button for energy saving.
1
8-2-1-12. Button Control
8-2-1-10
SM830283-00_欧州向け R32シングル36-71形TD&SM.indb 10 20/01/14 10:04:19