789
456
10
123
DELETE
JKL MNO
pose
Fe
• •
Reader function
?
pose
?
pose
?
•
Thailand
ABC DEF
PQRS TUV WXYZ
ON
SLEEP 30ÿ SLEEP 60ÿ SLEEP 90
SLEEP OFFÿ SLEEP 120
ÿ
39
RQT6010
6:30ÿÿ 0:00
6:30ÿÿ 6:30
OFF
0:00ÿÿ 0:00
CLOCK
6:30ÿÿ 7:40
TIMER PLAY
CLOCK
TIMER REC
SLEEP 30
Each time you press (unit: minute)
FADER
Display example) From 6:30 to 7:40
end time
Works on time.
Good night timer Lights
up during operation
Timer settings using an external device
Press [P-MD/AUX] and set the source of this
unit to “AUX”, then set the connected external
device to operate at the same time as this unit.
please give me.
• You cannot set Wake up timer and Answering
timer at the same time.
ÿ To cancel the wake-up timer Press [ PLAY/REC]
when the power is on to display “TIMER-OFF”. To make it work, turn on “PLAY” again. ÿ To check the
settings Press [DISPLAY] on the remote controller when the power is off. Source/start/end time/current
time ÿ source/volume are automatically displayed in this order (approximately 2 seconds each), and
then return to the original display. ÿTo change the settings Turn on the power to change the time,
and perform steps 1 to 4 and 7 on the left.
• Unless you cancel the timer, the same
When changing the
source, turn on the power, press [ PLAY/REC] to display “TIMER-OFF”, and then perform steps 5 to
7 on the left. ÿPlaying and recording can be performed even after setting the timer . Be sure to
turn off the power after operation. The timer does not work when the power is on.
start time
Good night timer can be used in combination with other timers. The sleep timer always takes
precedence, so make sure your appointment times don't overlap.
While “ ” is displayed, timer faders work for all timers. (The recorded signal is not affected when
the recording timer is on.) The timer fader works every time unless the “ ” display is turned off.
FADER
SLEEP
SLEEP
PLAY
Timer fader function
Remote control only
Good night timer
remote control only
ÿTo cancel the sleep timer Press
[SLEEP] repeatedly until “SLEEP OFF” is displayed. ÿ To
check the remaining time, press [SLEEP] once. The
remaining time is displayed for about 5 seconds. ÿ To
change the set time Press [SLEEP] to display the desired
time.
Press while listening to the source
to select the playing time (minutes)
Gradually increases/decreases the volume when the
timer is activated. Only the good night timer is gradually
decreasing. Use in combination with wake up and good
night timers. Press [TIMER FADER] when the power is
on. Press again to release.
When playing your favorite
source
(24-hour display)
When the desired time comes, the source will stop playing and the power will turn off.
FATHER HOURS
How to use
TIMER–PLAY
Thai ma
use
PGM CLEAR
AUTO OFF
SPACE
news
news
CHARA ENTER CANCEL
SLEEP
WRITE THE
AUX RADIO CD MD
The sleep timer cannot be used when the timer alarm is set ( page 41).
Machine Translated by Google
Summary of Contents for RX-MDX55
Page 52: ...Machine Translated by Google...