Connecting and adjusting the AM loop antenna (supplied)
Tsuzuki
2Connect to the rear of the unit
Adjusting the FM whip antenna
meaning(
This unit does not have a built-in AM antenna.
How to use the remote control
ÿ
Insert the batteries (included)
1 Assemble the antenna
3 Try to receive a broadcast station ( page 14), and adjust the
AM loop antenna to a position and angle that minimizes
noise.
Before use
Connect and adjust the AM loop antenna.
• • • • • • • • •
• • • • • • • • •
Preparations
for
connection
and •
preparations
for
adjusting
the
power
supply
unit
ON
AM
ÿ To remove the AM loop antenna , slowly
pull the cord of the loop antenna.
To prevent damage to the remote
controller • Do not disassemble or
modify the remote controller. • Do not
place heavy objects on the product. • Do not leave in
direct sunlight. • Do not spill liquids such as juice.
Adjust length and orientation.
please
For correct transmission • Do
not place any obstacles between the receiver and the remote control.
• Be careful of dust on the light receiving part and the tip of the remote
control. • Do not expose the sensor to direct sunlight or strong light from an
inverter fluorescent lamp.
The speakers of this unit are not designed to be magnetically
shielded. Do not place it near a TV, computer, etc.
Prepare
Firmly insert the
Transmitter
Click
Within approx. 7 m from the
front (The usable range varies
depending on the angle.)
30ÿ
Insert and correctly
while pressing the spring on the side
30ÿ
Code for AM loop antenna
2 AA size
Remote control sensor
insert into the groove
Notes on safety
Antenna connection and adjustment
Preparing the remote control
RQT6010
•
7
Machine Translated by Google
Summary of Contents for RX-MDX55
Page 52: ...Machine Translated by Google...
