Reference page
Memory reset (initialization)
In such a case
D
Radio
check here
C
51
ÿ While holding down [POWER ] on the main unit ÿ
Insert the power plug into the outlet
ÿRelease [POWER ] when “------------” is displayed on
the display •When the memory is reset (initialized),
high- speed recording cannot be used until about 74 minutes
later. It is necessary to reset the clock, broadcasting
station, etc.
ÿ Remove the power plug from the outlet. (Leave for 3 minutes or
longer.)
12
7
If the CD is badly bent or scratched, it cannot be used.
Certain parts cannot be played.
If your TV, VCR, BS tuner, etc. are on, try turning them off.
If there is a power cord near the antenna cord, move it
away.
Are there any obstacles between you and the machine?
• To reset (initialize) the contents of memory
FM reception is poor. There
is a lot of noise or distortion.
• Is the battery inserted in the opposite direction? •
If the batteries are exhausted, replace them with new ones.
I cannot receive TV broadcasts.
If the CD is dirty, wipe it with a soft cloth.
Remote control does not work.
can't play
If the transmitting station is far away, or inside a steel-reinforced
building, the signal will be weak. Install in a location with favorable
conditions, such as by a window.
• Is an AM loop antenna connected? • Try changing
the direction or position of the AM loop antenna.
47
• Is the CD upside down? • Are you using a
non-standard CD?
In the following cases, reset (initialize) the
memory according to the procedure on the right.
please.
7
47
Is your radio on FM? The TV can only
receive audio from channels 1 to 3 via FM.
7
7
Condensation may form on the lens when suddenly brought
from a cold place to a warm place. Please wait for about
an hour.
I can't receive AM well. A lot
of noise.
Try changing the length and orientation of the whip
antenna. If your TV, VCR, BS tuner, etc. are on, try turning
them off.
15
The number of tracks, etc., is not displayed even
when a CD is inserted.
Nothing responds when I press the button. I
want to erase the contents of the memory and set it again.
when needed
RQT6010
Is it
a
malfunction!?
Remote controller
Machine Translated by Google
Summary of Contents for RX-MDX55
Page 52: ...Machine Translated by Google...
