(close)
Accidental erasure prevention Recording/editing
(open)
Front
“UTOC Writing” is displayed for about 10 seconds during normal
recording, and for up to about 60 seconds during title editing.
Do not affix the label in an
unspecified place. (Also, do not insert an MD
with labels or tape sticking out or with traces of
peeling off, as this may cause malfunction.)
The shutter does not open. (If it should open,
close it immediately. Do not touch the disk
inside.)
In addition to the area for recording audio signals, an MD has an
area for recording the number of songs and performance time, etc.
The information written in this area is called TOC information.
If the power is turned off before “UTOC Writing” flashes, recording
and editing will not be recorded. Also, if the power is turned off or
there is vibration while the light is blinking, it will not be recorded correctly.
“UTOC Writing” is displayed to call attention.
Digital recording from a CD, etc. to an MD produces
a clear recording with little signal deterioration.
Therefore, for copyright protection, it is not possible
to digitally record from this MD to another MD. (No
“copy of copy”). Analog recording does not have
such restrictions.
The maximum number of tracks that can be
recorded on one MD is 254 within the recording
time. may be less.
When UTOC information is written in MD,
46
shutter
RQT6010
About MD
Sound Cruise
Tok
mark
marking
utok
truck
MD
About recording and editing of
ÿ Notes on recording and editing
Do not shake the device or disconnect the power cord while
recording or editing.
MD
ÿ Restrictions on digital recording (SCMS) Digital
recording (recording from CD to MD on this unit) is subject to
SCMS (Serial Copy Management System) restrictions.
MARK
often come out
ÿIn order not to erase important
recordings , slide the MD's accidental erasure prevention
knob in the direction of the opening. Close it when you start
recording or editing.
ÿTOC ( Table of Contents )
ÿFor recording
Data is recorded by MD
magnetism. This type of MD is
called a magneto-optical disc.
ÿPerformance-only
MD recording is not
possible. Data is recorded with
or without small depressions
called pits. This type of MD is
called an "optical disc".
ÿ It is a
"delimiter" recorded in the TRACK recording part.
From one break to the next is counted as one track. Track
marks can be automatically recorded during recording, or
you can freely add them yourself.
Handling request
MD
kind of
ÿUTOC (User Table of Contents) This is a TOC that
users can freely rewrite. Records entered characters
and edited results.
ÿ Unlike tapes, recorded
MDs automatically start recording from the continuation of
the previous recorded part, so there is no need to search for
unrecorded parts as with tapes. When the disc becomes full,
use the ERASE function to erase unwanted tracks before
recording. (Overwrite recording is not possible.)
ÿMARKING
Recording track marks during recording. In addition to
judging and marking the turning point of the song, you can
also mark your favorite position while listening to the song.
When a track mark is recorded, the track number after that
position is incremented by one.
the term
Machine Translated by Google
Summary of Contents for RX-MDX55
Page 52: ...Machine Translated by Google...
