Panasonic QuickDraw MC-V7388, Operating Instructions Manual

Page: 42 / 52

- 11 -
Power Vac Gauge Headlight Cord Length Bare Floor
120V AC(60Hz)
Yes Yes 35 Ft Yes
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
Voltaje Indicador de Luz Extensión Uso sin
aspiración de cordón alfombra
12.0 A/12,0 A
Si Si 10,6 m (35pi) Si
Alimentation Indicateur de
Dispositif Longueur du Position
sac plein
d’éclairage cordon plancher
120 V c.a. (60 Hz)
Oui Oui 10,6 m (35 pi) Oui
- 42 -
Hose
Manguera
Tuyau
Short Hose
Manguera
corta
Tuyau
court
Suction
Inlet Cover
Cubierta de
aspiración
Couvercle
de l’entrée
d’aspiration
Removing Clogs
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged
:
➢ ➢
Unplug vacuum.
➢ ➢
Pull open suction inlet cover and
check for clogging.
➢ ➢
Disconnect wand from short hose
and check the wand and hose.
➢ ➢
Plug in vacuum cleaner and turn on .
➢ ➢
Disconnect wand and stretch hose in
and out to remove clog.
➢ ➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
➢ ➢
Turn vacuum over and inspect
agitator area for clogs.