Panasonic PV-M2738 Operating, Service Manual, Page: 24 / 151

2-3
TV
Screws with
Washers (A)
Screws with
Washers (A)
4 CRT Unit
CRT Unit
Disassembly Procedure
Remove 4 Screws with Washers (A). Then, pull out the CRT
Unit.
Note:
Place the Unit face down on a soft cloth before removing the
CRT Unit.
Fig. D5
5 Operation
II C.B.A.
P6301
Locking Tabs (B)
Locking Tab
(B)
Locking Tab
(B)
5 Operation
I C.B.A.
Operation I and II C.B.A.s
Disassembly Procedure
1. Disconnect Connector P6301 on the Main C.B.A.
2. Remove the Operation I and II C.B.A.s by releasing 4
Locking Tabs (B).
Note:
Work carefully so as not to break the Locking Tabs.
Fig. D6
3 TV Power
C.B.A.
Locking Tabs
(A)
Screw (C)
Heat Sink
Support Angle
Sub Frame
Screws (B)
3 TV Power C.B.A.
Tabs (C)
Degaussing
Coil Connector
Sub Frame
TV Power C.B.A.
Disassembly Procedure
1. Disconnect the Degaussing Coil Connector on the TV
Power C.B.A.
2. Slide out the Sub Frame along with the TV Power C.B.A. as
far as it will go.
Then, lift it up on to release 2 Tabs (C) and remove it out from
the TV cavity.
Fig. D4-1
3. Remove Screw (B), Screw (C), and Heat Sink Support
Angle.
Then, remove the TV Power C.B.A. by releasing 2 Locking
Tabs (A) from the Sub Frame.
Note:
Work carefully so as not to break the Locking Tabs.
Fig. D4-2