8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : [email protected]
BATTERY
PACK
Quick Operation Guide
When the LCD monitor is open, the EVF automatically turns OFF (page 20).
1
Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle.
2
Set POWER to CAMERA.
3
Press RECORD/PAUSE
to start recording.
Press RECORD/PAUSE
again to pause recording.
When the LCD monitor is open, the EVF automatically turns OFF (page 16).
1
Attach fully
charged Battery
(page 9).
2
Slide TAPE EJECT
to open door.
3
Insert cassette
(page 11).
4
Press here to close
door.
1
Press LCD-OPEN to unlock the LCD monitor.
Swing it fully open and adjust the angle (see above).
2
Set POWER to VCR.
Charging the Battery Pack
Charge Battery Pack fully before
operation (page 9).
1
Plug in AC
Adaptor.
Camera Recording
Playback using the LCD Monitor
Insert Cassette
3
Press REWIND/SEARCH to
rewind tape.
4
Press PLAY to start playback.
5
Press STOP to stop playback.
2
Insert Battery. CHARGE
Lamp flashes, then stays lit
when charging is complete.
CAMERA
CAMERA
OFF
OFF
VCR
VCR
PHOTO
PHOTO
CAMERA
OFF
VCR
PHOTO
Note:
• Remove the Protection Film before use.
Protection Film
Note:
• Remove the Protection Film before use.
Protection Film
