Adjusting the projection position with the optical axis shift function
This projector is equipped with vertical optical axis shift function. The projection position can be adjusted in the
range shown in the following figure with the optical axis shift function based on the position of the projected screen
in the home position (standard projection position).
When the projector is installed on the desk, the projected image will move upward if you turn the vertical lens shift
dial clockwise and will move downward if you turn it counterclockwise.
The following figure shows the adjustment range when the projector is installed on the desk.
PT-VZ580
PT-VW540
PT-VX610
Projection screen width H
Standard projection position
Projection screen height V
0.44 V
Standard projection position
0.44 V
Projection screen width H
Projection screen height V
Projection screen width H
0.4 V
Projection screen height V
Standard projection position
Note
f
The standard projection position indicates the projection screen position in the state without vertical shift adjustment. At this time, the vertical
lens shift dial is fully turned counterclockwise.
ENGLISH
-
47
Chapter 3 Basic Operations - Projecting
