1) Press
as
to select [HIGH ALTITUDE MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Select when using the projector in the elevation of below 1 400 m (4 593').
[HIGH1]
Select when using the projector in the elevation of above 1 400 m (4 593') and below 2 000 m (6 562′).
[HIGH2]
Select when using the projector in the elevation of above 2 000 m (6 562′) and below 2 700 m (8 858′).
Note
f
It is set to [OFF] when using the projector in the elevation of below
1 400 m (4 593')
. It is set to [
HIGH1
] when using the projector in the
elevation of above
1 400 m (4 593')
and below 2 000 m
(6 562′)
. It is set to [
HIGH2
] when using the projector in the elevation of above
2 000
m
(6 562′)
and below 2 700 m
(8 858′)
. Failure to do so may shorten the life of the internal parts and result in malfunctions.
f
Do not set the projector in the elevation of
2 700 m
(8 858′) or above, otherwise it may shorten the life of the internal parts and result in
malfunctions.
f
When it is set to [HIGH1] or [HIGH2], the fan noise becomes louder and fan speed increases.
[LAMP POWER]
Switch the luminance of the luminous lamp according to the operating environment of the projector or the
purpose.
1) Press
as
to select [LAMP POWER].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Select when high luminance is required.
[ECO]
Select when high luminance is not required.
Note
f
The projector can consume less power, extend the luminous lamp life longer and produce less operation noise when set from [NORMAL] to
[ECO].
[ECO MANAGEMENT]
This function optimizes the luminous lamp power according to the operating status and reduces power
consumption.
1) Press
as
to select [ECO MANAGEMENT].
2) Press the <ENTER> button.
f
The
[ECO MANAGEMENT]
screen is displayed.
3) Press
as
to select one item.
Setting [AUTO POWER SAVE] in Step 3)
Set whether or not to enable the three functions, [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [AV
MUTE DETECTION].
Note
f
[AUTO POWER SAVE] cannot be set when the [LAMP POWER] is set to [ECO].
4) Press
qw
to switch the [AUTO POWER SAVE].
[ON]
Enables power-saving mode.
[OFF]
Disables power-saving mode.
5) Press
as
to select one item.
[AMBIENT LIGHT DETECTION]
Adjusts the luminous lamp power according to the ambient brightness.
[SIGNAL DETECTION]
Drops the luminous lamp power when no signal is input.
[AV MUTE DETECTION]
Drops the luminous lamp power in the AV mute mode.
6) Press
qw
to switch the item.
76 -
ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu