[POSITION] menu
On the menu screen, select [POSITION] from the main menu, and select an item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 52) for the operation of the menu screen.
[REALTIME KEYSTONE]
The projector can correct the vertical trapezoidal distortion automatically when the projector is installed tilted.
1) Press
as
to select [REALTIME KEYSTONE].
2) Press
qw
or the <ENTER> button.
f
[REALTIME KEYSTONE]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
[ON]
Enables the automatic realtime keystone correction.
[OFF]
Disables the automatic realtime keystone correction.
Note
f
Depending on the installation situation, the trapezoidal distortion may not be able to be fully corrected. In this case, perform the adjustment
in the [POSITION] menu → [SCREEN ADJUSTMENT].
f
[REALTIME KEYSTONE] cannot be set when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set to [FRONT/CEILING] or
[REAR/CEILING].
[SCREEN ADJUSTMENT]
Correct the distortion when the projector is installed as tilted or the screen is tilted or curved.
1) Press
as
to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f
The
[SCREEN ADJUSTMENT]
screen is displayed.
3) Press
as
to select one item to adjust.
[KEYSTONE]
Adjusts when the projected image is distorted as trapezoid.
[CORNER CORRECTION]
Adjusts when the four corners of the projected image are distorted.
[CURVED CORRECTION]
Adjusts when the projected image is curved distortion.
4) Press the <ENTER> button.
f
The
[KEYSTONE]
screen,
[CORNER CORRECTION]
screen or the
[CURVED CORRECTION]
screen is
displayed.
Note
f
Only one item of [KEYSTONE], [CORNER CORRECTION] and [CURVED CORRECTION] can be enabled. If you perform the setting of
[KEYSTONE], [CORNER CORRECTION] or [CURVED CORRECTION] and then perform the setting of the other items, the value of the
previous items will be reset.
f
The image quality will deteriorate as the correction amount of [SCREEN ADJUSTMENT] increases, making focusing difficult. Install the
projector so that the correction amount is as small as possible.
f
When adjustments are performed with [SCREEN ADJUSTMENT], the image size also changes.
Setting
[KEYSTONE]
1) Press
as
to select [SCREEN ADJUSTMENT].
2) Press the <ENTER> button.
f
The
[SCREEN ADJUSTMENT]
screen is displayed.
3) Press
as
to select [KEYSTONE].
4) Press the <ENTER> button.
f
The
[KEYSTONE]
individual adjustment screen is displayed.
ENGLISH
-
61
Chapter 4 Settings - [POSITION] menu