4) Perform the detailed setting of [WIRED LAN].
f
For details, Refer to “[WIRED LAN]” (
x
page 102).
Note
f
To connect to an existing network, perform after consulting your network administrator.
r
Factory default setting
f
Following setting has been made as a factory default.
[DHCP]
[OFF]
[IP ADDRESS]
192.168.10.100
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.10.1
[DNS1] / [DNS2]
(Blank)
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f
If the projector is in factory default setting, you can use it as it is if the network setting of the computer is as
follows.
[IP ADDRESS]
192.168.10.101
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.10.1
Connecting with wireless LAN
The wireless module (Model No.: AJ-WM50) of the optional accessories is required if you want to use the network
function through the wireless LAN.
Connection example
IEEE802.11b/g/n
Wireless module of optional accessories
(Model No.: AJ-WM50)
Preparation and confirmation of the projector
1) Turn on the projector.
2) Attach the wireless module (Model No.: AJ-WM50) of optional accessories firmly into the <USB
(VIEWER/WIRELESS/DC OUT)> terminal.
Wireless module of optional accessories
(Model No.: AJ-WM50)
3) Press the <NETWORK/USB> button to switch to NETWORK input.
f
The network input idle screen is displayed. The QR code, login password (a four-digit number that is
automatically generated), PROJECTOR NAME, SSID, IP ADDRESS (WIRELESS) and IP ADDRESS
ENGLISH
-
117
Chapter 5 Operation of Function - Network connection
