Chapter 3
Basic Operations — Switching on/off the projector
ENGLISH - 67
Making adjustments and selections
It is recommended to perform the focus adjustment after 30 minutes have elapsed with the focus test pattern
displayed.
For details of the test pattern, refer to “[TEST PATTERN] menu” (
x
page 157).
7)
1) 9)
6)
4)
8) 10)
4)
2) 3)
5)
1) 6) 8) 9) 10)
2) 3)
7)
1) Press the <FOCUS> button to roughly adjust the focus of the projected image. (
x
page 70)
2) Change the setting of the [PROJECTOR SETUP] menu
→
[PROJECTION METHOD] depending on the
installation mode. (
x
page 36)
f
Refer to “Navigating through the menu” (
x
page 79) for the operation of the menu screen.
3) Set [LENS TYPE].
f
Confirm the setting of the lens type when using the projector for the first time after attaching the projection
lens. (
x
page 72)
4)
Press the input selection button (<RGB1> and <RGB2>, or <RGB1/2>, <DIGITAL LINK>, <DVI-D>,
<SDI>, <HDMI>) to select the input.
5)
Adjust the front, back and sideway tilt of the projector with the adjustable feet. (
x
page 47)
6) Press the <SHIFT> button to adjust the position of the projected image.
7)
If the input signal is the analog RGB signal or the DVI-D/HDMI signal, press the <AUTO SETUP>
button.
8)
Press the <ZOOM> button to adjust the image size to match the screen.
9) Press the <FOCUS> button again to adjust the focus.
10)
Press the <ZOOM> button again to adjust the zoom to match the projected image size to the screen.
Note
f
When the projector is switched on for the first time after purchase, as well as when the [PROJECTOR SETUP] menu
→
[INITIALIZE]
→
[ALL
USER DATA] is executed, the focus adjustment screen is displayed after projection starts, and then the
[INITIAL SETTING]
screen and the
[ADMINISTRATOR ACCOUNT]
screen are displayed. When the [PROJECTOR SETUP] menu → [INITIALIZE] → [NETWORK/E-MAIL] is
executed, the
[ADMINISTRATOR ACCOUNT]
screen is displayed after projection starts.
Refer to “When the initial setting screen is displayed” (
x
page 59) and “When the administrator account setting screen is displayed”
(
x
page 65) for details.
