Chapter 5
Operations — Updating the firmware
200 - ENGLISH
7) Click [Next].
f
The connection setting screen is displayed.
1.01
8) Enter the setting details of the projector.
f
Enter the details set in the projector to be updated.
Item
Details
[IP Address]
The [NETWORK] menu
→
[NETWORK STATUS]
→
[IP ADDRESS]
[Command Port]
The [NETWORK] menu
→
[NETWORK CONTROL]
→
[COMMAND PORT]
[User Name]
The user name of the administrator account
[Password]
The password of the administrator account
9) Click [Next].
f
The update confirmation screen is displayed.
10) Click [Start].
f
Update is started.
f
The light source indicator <LIGHT1> and the light source indicator <LIGHT2> on the projector blink red
alternately while updating.
f
Elapsed time and rough progress can be confirmed in the update status display screen. The required time
is approximately 20 minutes.
