Chapter 4
Settings — [PROJECTOR SETUP] menu
142 - ENGLISH
g
When switching to the secondary input while the backup function is active
f
When [BACKUP INPUT MODE] is set to anything other than [OFF], the combination of that input is displayed in [PRIMARY INPUT] and
[SECONDARY INPUT] of the
[BACKUP INPUT SETTING]
screen.
f
[BACKUP INPUT STATUS] is displayed in the input guide (
x
page 121) and the
[STATUS]
screen (
x
pages 77, 151) when [BACKUP
INPUT MODE] is set to anything other than [OFF].
When the signal can be switched to the backup input signal using the backup function, [ACTIVE] is displayed in [BACKUP INPUT STATUS].
When it is not possible, [INACTIVE] is displayed instead.
f
When [AUTOMATIC SWITCHING] is set to [ENABLE], and [BACKUP INPUT STATUS] shows [ACTIVE], the signal is switched to the backup
input if a disruption occurs in the input signal.
f
When [AUTOMATIC SWITCHING] is set to [ENABLE], the indication in [BACKUP INPUT STATUS] will change to [INACTIVE] if the input
signal is disrupted and automatically switches to the backup input. In this case, it is not possible to switch to the backup input signal until the
original input signal is restored. If the input has switched to the backup input automatically, it is possible to switch to the backup input signal
when the original signal has been restored. In this case, the current input is maintained.
f
The primary input setting values are applied to image adjustment values such as the [PICTURE] menu
→
[PICTURE MODE], [GAMMA],
and [COLOR TEMPERATURE].
[SECONDARY INPUT]
Set the secondary input switching function that will automatically switch to the specified input when the input signal
of projecting image is discontinued.
1) Press
as
to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f
The
[NO SIGNAL SETTING]
screen is displayed.
3) Press
as
to select [SECONDARY INPUT].
4) Press the <ENTER> button.
f
The
[SECONDARY INPUT]
screen is displayed.
5) Press
as
to select the input to be specified as the switching destination, and press the <ENTER>
button.
[OFF]
Disables the secondary input switching function.
[DIGITAL LINK]
*1
Sets the secondary input to DIGITAL LINK
*1
.
[HDMI]
Sets the secondary input to HDMI.
[DVI-D]
Sets the secondary input to DVI-D.
[RGB 1]
Sets the secondary input to RGB 1.
[RGB 2]
Sets the secondary input to RGB 2.
[SDI]
Sets the secondary input to SDI.
*1
Individual input on the twisted-pair-cable transmitter or the DIGITAL LINK output supported device cannot be specified.
Note
f
When the [PROJECTOR SETUP] menu
→
[NO SIGNAL SETTING]
→
[BACKUP INPUT SETTING]
→
[BACKUP INPUT MODE] is set to
anything other than [OFF], the secondary input switching function will not operate even when [SECONDARY INPUT] is set to anything other
than [OFF]. The backup input switching function is prioritized.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1) Press
as
to select [NO SIGNAL SETTING].
2) Press the <ENTER> button.
f
The
[NO SIGNAL SETTING]
screen is displayed.
3) Press
as
to select [BACK COLOR].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[BLUE]
Displays the entire projection area in blue.
[BLACK]
Displays the entire projection area in black.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
