Chapter 2
Getting Started — Removing/attaching the projection lens
50 - ENGLISH
Attaching the projection lens
Attach the projection lens using the following procedure.
(ii)
(i)
Guide groove
Guide
Projection lens
Fig. 1
Fig. 2
Fig. 3
Lens Mount Cover
1)
Remove the Lens Mount Cover, and align the projection lens guide to the guide groove of the
projector and insert to the end. (Fig. 1)
2) Turn the projection lens clockwise until it clicks. (Fig. 2)
3) Attach the Lens Mount Cover. (Fig. 3)
f
Align the Lens Mount Cover and the projector at the dashed line positions in the figure to attach, and turn
the Lens Mount Cover clockwise to fix it to the projector.
Attention
f
Turn the projection lens counterclockwise to confirm that it does not come out.