Chapter 5
Operations — Web control function
ENGLISH - 207
Lens position setting page
Click [Projector control]
→
[Detail control]
→
[LENS]
→
[SET POSITION].
4
3
2
1
1 [Get]
Acquires the current lens position and displays the acquired
values in the lens position information field.
2
Lens position information field
Enter the lens position (vertical position, horizontal position,
focus position, and zoom position).
3 [Back]
Returns to the [LENS] page.
4 [Apply]
Moves to the lens position displayed in the lens position
information field.
Note
f
The zoom position is displayed in the lens position information field only in following case.
g
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET‑D75LE6, ET‑D75LE8, ET‑D75LE10, ET‑D75LE20,
ET‑D75LE30, ET‑D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET‑D75MKS10), or
when a projection lens with the stepping motor is attached.
