Chapter 4
Settings — [DISPLAY OPTION] menu
136 - ENGLISH
[MENU MODE]
Set the display mode of the menu screen (OSD).
1) Press
as
to select [MENU MODE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[NORMAL]
Displays all menu items.
[SIMPLE]
Displays some of the menu items that are used for basic setting or adjustment.
Note
f
For the menu items that are displayed when [SIMPLE] is set, refer to “Main menu” (
x
page 87), “Sub‑menu” (
x
page 88).
[IMAGE ROTATION]
Set whether to rotate the input image when projecting.
1) Press
as
to select [IMAGE ROTATION].
2) Press
qw
to select an item.
f
The items will switch each time you press the button.
[OFF]
Projects the input image without rotating.
[CLOCKWISE]
Rotates the input image by 90° clockwise and project it.
[COUNTERCLOCKWISE]
Rotates the input image by 90° counterclockwise and project it.
Note
f
[IMAGE ROTATION] is disabled while displaying 3D image, displaying image in simultaneous format, and during P IN P.
f
The on-screen display orientation does not change even when this item is set to anything other than [OFF]. Set the [DISPLAY OPTION]
menu
→
[ON-SCREEN DISPLAY]
→
[OSD ROTATION] (
x
page 134) as required.
[BACK COLOR]
Set the display of the projected screen when there is no signal input.
1) Press
as
to select [BACK COLOR].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[BLUE]
Displays the entire projection area in blue.
[BLACK]
Displays the entire projection area in black.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
Note
f
To create and register the [USER LOGO] image, use “Logo Transfer Software”. The software can be downloaded from the Panasonic
website (https://panasonic.net/cns/projector/).
[STARTUP LOGO]
Set the logo display when the power is turned on.
1) Press
as
to select [STARTUP LOGO].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[DEFAULT LOGO]
Displays the Panasonic logo.
[USER LOGO]
Displays the image registered by the user.
[NONE]
Disables the startup logo display.
