Chapter 4
Settings — [NETWORK] menu
ENGLISH - 193
[NETWORK STATUS]
Display the status of the projector network.
1) Press
as
to select [NETWORK STATUS].
2) Press the <ENTER> button.
f
The
[NETWORK STATUS]
screen is displayed.
[DHCP]
Displays the status of use of the DHCP server.
[IP ADDRESS]
Displays the [IP ADDRESS].
[SUBNET MASK]
Displays the [SUBNET MASK].
[DEFAULT GATEWAY]
Displays the [DEFAULT GATEWAY].
[DNS1]
Displays the address of the preferred DNS server.
[DNS2]
Displays the address of the alternate DNS server.
[MAC ADDRESS]
Displays the [MAC ADDRESS].
[DIGITAL LINK MENU]
When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected
to the <DIGITAL LINK/LAN> terminal, the main menu of the connected DIGITAL LINK output supported device is
displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.
Note
f
[DIGITAL LINK MENU] cannot be selected when [EXTRON XTP] is set to [ON].
f
The operation guidance for the “RETURN” button is in the menu screen of the Digital Interface Box and DIGITAL LINK Switcher. The
projector does not have the “RETURN” button, but the same operation is available with the <MENU> button.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press
as
to select [Art-Net SETUP].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the Art-Net function.
[ON(2.X.X.X)]
Enables the Art-Net function and sets the IP address to 2.X.X.X.
[ON(10.X.X.X)]
Enables the Art-Net function and sets the IP address to 10.X.X.X.
[ON(MANUAL)]
Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].
f
When other than [OFF] is selected, proceed to Step
3)
.
3) Press the <ENTER> button.
f
The
[Art-Net SETUP]
screen is displayed.
4) Press
as
to select an item, and press
qw
to switch the setting.
[NET]
Enter [NET] to be used when the projector processes Art-Net.
[SUB NET]
Enter [SUB NET] to be used when the projector processes Art-Net.
[UNIVERSE]
Enter [UNIVERSE] to be used when the projector processes Art-Net.
[START ADDRESS]
Enter [START ADDRESS] to be used when the projector processes Art-Net.
5) Press
as
to select [STORE], and press the <ENTER> button.
6) When the confirmation screen is displayed, press
qw
to select [OK], and press the <ENTER> button.
Note
f
If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.
