Chapter 4
Settings — [PROJECTOR SETUP] menu
ENGLISH - 167
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
1) Press
as
to select [SCHEDULE].
2) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the schedule function.
[ON]
Enables the schedule function. Refer to “How to assign a program” (
x
page 167) or “How to set a
program” (
x
page 167) for how to set the schedule.
Note
f
When [SCHEDULE] is set to [ON] while the [PROJECTOR SETUP] menu
→
[STANDBY MODE] is set to [ECO], the [STANDBY MODE]
setting is forcibly switched to [NORMAL], and the setting cannot be changed to [ECO]. The [STANDBY MODE] setting will not return to
original even if [SCHEDULE] is set to [OFF] in this condition.
How to assign a program
1) Press
as
to select [SCHEDULE].
2) Press
qw
to select [ON], and press the <ENTER> button.
f
The
[SCHEDULE]
screen is displayed.
3) Select and assign a program to each day of week.
f
Press
as
to select the day of week, and press
qw
to select a program number.
f
You can set the program from No.1 to No.7. “- - -” indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1) Press
as
to select [SCHEDULE].
2) Press
qw
to select [ON], and press the <ENTER> button.
f
The
[SCHEDULE]
screen is displayed.
3) Press
as
to select [PROGRAM EDIT].
4) Press
qw
to select a program number, and press the <ENTER> button.
5) Press
as
to select a command number, and press the <ENTER> button.
f
You can change the page using
qw
.
6) Press
asqw
to select [TIME], and press the <ENTER> button.
f
The projector is in the adjustment mode (the time is blinking).
7) Press
qw
to select “hour” or “minute”, and press
as
or the number (<0> - <9>) buttons to set a
time, and then press the <ENTER> button.
8) Press
asqw
to select [COMMAND].
9) Press the <ENTER> button.
f
The
[COMMAND]
detailed screen is displayed.
10) Press
as
to select a [COMMAND].
f
For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time
you press
qw
.
f
When [INPUT] is selected, press the <ENTER> button, and then press
asqw
to select the input to be
set.
