Panasonic PT-MZ10K Operating Instructions Manual Download Page 72

Page: 72 / 248

Chapter 3

Basic Operations — Operating with the remote control

72 - ENGLISH

Operating with the remote control

Using the shutter function

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible

to turn off the image temporarily.

button

1) Press the <SHUTTER> button.

The image disappears.

This operation can be also performed using the <SHUTTER> button on the control panel.

2) Press the <SHUTTER> button again.

The image is displayed.

Note

The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the shutter function is in use (shutter: closed).

The fade-in/fade-out time of the image can be set by the [DISPLAY OPTION] menu

→

[SHUTTER SETTING].

If the shutter function is enabled (shutter: closed) while the [PROJECTOR SETUP] menu

→

[LENS]

→

[ACTIVE FOCUS OPTIMIZER]

→

[ACTIVE FOCUS] is set to [ON], the operation of the temperature detection correction of the active focus optimizer function will stop.

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen

display, such as the menu or the input terminal name.

button

1) Press the <ON SCREEN> button.

Turns off (hides) the on-screen display.

2) Press the <ON SCREEN> button again.

Cancels the hide condition of the on-screen display.

Note

The hide condition of the on-screen display can also be canceled by pressing the <MENU> button on the control panel for at least three

seconds while the on-screen display is off (hidden).

Summary of Contents for PT-MZ10K

























































































































































































































































Search results

Summary of Contents for PT-MZ10K

Reviews:

Brands by name

Popular brands

Panasonic PT-MZ10K, Operating Instructions Manual

Search results

Summary of Contents for PT-MZ10K

Reviews:

Brands by name

Popular brands