Chapter 4
Settings — [PROJECTOR SETUP] menu
124 - ENGLISH
[CEILING]
Select this item when installing the projector using the Ceiling Mount Bracket (optional).
Projected image is inverted upside down.
Note
f
Refer to “Angle sensor” (
x
page 35) for details on the range of the installation attitude that can be detected by the built-in angle sensor.
[LENS]
Perform the setting and operation regarding the projection lens.
[LENS TYPE]
When the projection lens is attached or replaced, confirm the [LENS TYPE] setting.
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Confirm the type of the projection lens in [LENS TYPE].
Note
f
The information of the projection lens is automatically acquired when the projector is turned on. The acquired information is displayed in
[LENS TYPE].
f
[---] is displayed in [LENS TYPE] in following cases.
g
When the automatic acquiring of the projection lens information has failed
f
Even when the [PROJECTOR SETUP] menu
→
[LENS]
→
[ACTIVE FOCUS OPTIMIZER]
→
[ACTIVE FOCUS] is set to [ON], the active
focus optimizer function will not operate if [---] is displayed in [LENS TYPE].
f
Turn off the projector and reattach the projection lens when [---] is displayed in [LENS TYPE].
[LENS MEMORY]
The adjusted lens position (vertical position, horizontal position, focus position, zoom position, and periphery focus
position) can be saved and loaded.
Saving lens position
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The
[LENS]
screen is displayed.
3) Press
as
to select [LENS MEMORY].
4) Press the <ENTER> button.
f
The
[LENS MEMORY]
screen is displayed.
5) Press
as
to select [LENS MEMORY SAVE].
6) Press the <ENTER> button.
f
The
[LENS MEMORY SAVE]
screen is displayed.
f
If the lens memory has already been saved, the name of the saved lens memory and its lens position
information ([VERTICAL POSITION]/[HORIZONTAL POSITION]/[FOCUS POSITION]/[ZOOM POSITION]/
[PERIPHERY FOCUS POSITION]) are displayed in the
[LENS MEMORY SAVE]
screen.
7) Press
as
to select the item to save, and press the <ENTER> button.
f
The confirmation screen is displayed.
f
Current lens position information ([VERTICAL POSITION]/[HORIZONTAL POSITION]/[FOCUS POSITION]/
[ZOOM POSITION]/[PERIPHERY FOCUS POSITION]) is displayed in the confirmation screen.
8) Press
qw
to select [OK], and press the <ENTER> button.
f
The
[LENS MEMORY NAME INPUT]
screen is displayed.
9) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
