manualshive.com logo in svg

Panasonic PT-MZ10K, Operating Instructions Manual

Share
Download
Panasonic PT-MZ10K Operating Instructions Manual Download Page 193

Chapter 5

 

Operations — Using the information monitor function

ENGLISH - 193

7)  Press 

qw

 to switch the setting item.

 

f

The items will switch each time you press the button.

[OFF]

Sets the screen mode during no operation to the hide mode.

Does not display the information.

[USER VIEW]

Sets the screen mode during no operation to the USER VIEW mode.

Displays the items set in the menu operation mode 

→

 [SETUP] menu 

→

 [INFO MONITOR]. For 

details, refer to “Setting the information to display” (

x

 page 193).

Note

 

f

This setting item is common with the following menu item in the on-screen menu.

 

g

The [PROJECTOR SETUP] menu 

→

 [INFO MONITOR SETTING] 

→

 [DEFAULT]

 

f

Even if [DEFAULT] is set to [OFF], the content of an error or a warning is automatically displayed when it occurs.

 

r

Setting the information to display

Set the items to display during the USER VIEW mode.

1)  Press 

as

 to select [SETUP].

2)  Press the <ENTER> button.

 

f

The sub-menu item is displayed.

3)  Press 

as

 to select [INFO MONITOR].

4)  Press the <ENTER> button.

 

f

The detailed setting item is displayed.

5)  Press 

as

 to select an item to change setting.

 

f

The current setting is displayed.

Item

Details

Factory default

[INPUT]

Currently selected input terminal

[ON]

[SIGNAL NAME]

Input signal name

[ON]

[AC VOLTAGE]

Input supply voltage

[ON]

[INTAKE AIR TEMP.]

Intake air temperature of the projector

[ON]

[EXHAUST AIR TEMP.]

Exhaust air temperature of the projector

[OFF]

[SHUTTER]

Status of the shutter ([CLOSE]: Shutter function enabled; [OPEN]: Shutter 

function disabled)

[OFF]

[OSD]

Status of the on-screen display function ([ON]: Display; [OFF]: Hide)

[OFF]

[IP ADDRESS]

IP address of the wired LAN

[OFF]

6)  Press the <ENTER> button.

 

f

Setting can be changed.

7)  Press 

qw

 to switch the setting.

 

f

The items will switch each time you press the button.

[ON]

Displays the items during the USER VIEW mode.

[OFF]

Does not display the items during the USER VIEW mode.

 

f

Repeat Steps 

5)

 to 

7)

 until the desired display items are set.

Note

 

f

This setting item is common with the following menu item in the on-screen menu.

 

g

The [PROJECTOR SETUP] menu 

→

 [INFO MONITOR SETTING] 

→

 [USER VIEW]

 

r

Setting the direction to display

Set the direction of the text to display in the information monitor.

1)  Press 

as

 to select [SETUP].

2)  Press the <ENTER> button.

 

f

The sub-menu item is displayed.

3)  Press 

as

 to select [INFO MONITOR].

Summary of Contents for PT-MZ10K

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands