ENGLISH - 7
Product composition
Check that the package contains the following parts. The number enclosed in < > is the quantity.
Attachment plate <1>
Falling prevention wire
The attachment plate is mounted to the wall or ceiling to
support the entire product.
The falling prevention wire is secured with tape at the
inner side of the attachment plate.
Projector mount bracket <1>
The projector mount bracket is mounted to the projector
and then attached to the attachment plate.
Adapter cover <1>
The adapter cover hides the <AC IN> socket part of the
projector.
String <1>
This is to prevent the adapter cover from dropping.
Power cord
(K2CM3YY00038) <1>
(K2CT3YY00078) <1>
Connect to the <AC IN> socket of the optional projector.
Screw with captive washer (M4 x 8) <8>
(ET-JPC200BE: XYN4+F8FJK)
(ET-JPC200WE: 4112055002)
These are used to mounting or assembling the product.
Attention
z
After removing the product from the package, dispose of the power cord cap and packing material appropriately.
z
The supplied power cord should not be used with projectors other than specified.
z
If any part is missing, please contact the dealer.
z
Store small parts appropriately in a place out of the reach of infants and small children.
