PROJECTOR SETUP menu
E
NGLISH - 45
Settings
Q
COMPUTER2
COM.AUDIO IN 2
Output audio that is input to the
COMPUTER AUDIO 2
.
AUDIO IN
Output audio that is input to the
AUDIO IN
.
You can use the 7 different test patterns to adjust the
focus of the image. See “Lens shift and positioning” on
page 19.
1. Press the
ENTER
button to display the test pattern
1.
2. Press
I
H
to select the required test pattern.
3. Adjust the focus with the focus lever.
4. Press the
MENU
or
RETURN
button to return to
the previous menu, or press repeatedly to escape
from the menu mode.
You can reset all of the customised settings to the factory
defaults except
NETWORK
,
RUNTIME
and
REMAINING FILTER
of
STATUS
in
PROJECTOR
SETUP
menu.
1. Press the
ENTER
button.
2. Select
OK
by pressing
I
, then press the
ENTER
button.
3. Turn off the power by pressing the power button.
4. Switch off the
MAIN POWER
button to reset the
projector.
5. Switch on the
MAIN POWER
button.
6. Press the power button.
7. The minimum required setting screen will be
displayed.
See “Minimum required setting screen” on page 13.
After you replaced the Auto Cleaning Filter (ACF),
REMAINING FILTER
of
STATUS
in
PROJECTOR
SETUP
need to be reset to "0".
1. Press the
ENTER
button for more than 3 seconds.
The confirmation screen will be displayed.
2. Select
OK
by pressing
I
, then press the
ENTER
button.
3. Display the
STATUS
and confirm the figure.
TEST PATTERN
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the centre of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE
in
POSITION
menu.
INITIALIZE ALL
NOTE:
• The security system is deactivated by default and when
initialised.
• When the projector is initialised, it will be reset to the
factory default password operation.
FILTER COUNTER RESET
Summary of Contents for PT-FW300E
Page 5: ...Important Safety Notice ENGLISH 5 Important Information ...
Page 65: ......
Page 66: ...Printed in Japan S0908 3019D ...
