background image

Important  Information

Important Safety Notice

E

NGLISH - 3

Information for Users on Collection and Disposal of Old Equipment and used 
Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical 
and electronic products and batteries should not be mixed with general household waste. 
For proper treatment, recovery and recycling of old products and used batteries, please take them to 
applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC 
and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and 
prevent any potential negative effects on human health and the environment which could otherwise 
arise from inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your 
local municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for 
further information.

Information on Disposal in other Countries outside the European Union

These symbols are only valid in the European Union. If you wish to discard these items, please contact 
your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples): 

This symbol might be used in combination with a chemical symbol. In this case it complies with the 
requirement set by the Directive for the chemical involved.

Summary of Contents for PT-FW300E



































































Reviews: