E
NGLISH - 27
Basic O
p
eration
Remote control operation
You can operate the projector with the remote control
within the remote range 15 m (49'2"), approximately
± 30° vertically and horizontally.
Q
Facing to the projector
Ensure the remote control emitter is facing to the
remote control signal receptor on front/back of the
projector and press the required buttons to
operate.
Q
Facing to the screen
Ensure the remote control emitter is facing to the
screen and press the required buttons to operate
the projector. The signal will be reflected off the
screen. The operating range may differ due to the
screen material. This function may not be effective
with a translucent screen.
You can adjust the setting of
SHIFT
,
DOT
CLOCK
and
CLOCK PHASE
in the
POSITION
menu automatically for the projected
COMPUTER
signal image.
With DVI signal, adjust
SHIFT
setting only.
Operating range
(Shown as PT-FW300NTE)
NOTE:
• Do not let strong light shine onto the signal receptor.
The remote control may malfunction under strong light
such as fluorescent.
• If there are any obstacles between the remote control
and the remote control signal receptor, the remote
control may not operate correctly.
Setting up the image position automatically
NOTE:
• If the dot clock frequency is 150 MHz or higher,
AUTO
SETUP
is not effective.
• If the projected image is dark or blurred around the
edge,
AUTO SETUP
may stop the processing before
complete. Project a much clearer or lighter image and
press the
AUTO SETUP
button again.
• When there is no signal input and
SIGNAL SEARCH
in
DISPLAY OPTION
menu is
ON
, the auto signal
detecting system will start.
Screen
Projected image
Summary of Contents for PT-FW300E
Page 5: ...Important Safety Notice ENGLISH 5 Important Information ...
Page 65: ......
Page 66: ...Printed in Japan S0908 3019D ...
