61
Using WebBrowser
(cont.)
Enabling JavaScript
If JavaScript has been set to disable, enable it.
2
Select [Security] and set the security level to [Default Level], or select [Custom
Level] and check the [Enable] checkbox under [Active scripting].
Open <Internet Properties> window.
Click [Start]
ĺ
[Control Panel]
ĺ
[Network and Internet Connections]
ĺ
[Internet Option].
1
Accessing from the WebBrowser
<Top window>
1
Click [
] on the launcher.
Or start up the WebBrowser, and enter the IP address set by the projector.
The WebBrowser starts up and the authentication window appears.
2
Enter the user name and the password.
3
Click [OK].
<Monitored information> window appears. (Next page)
• The default user name and password settings are as follows.
User name: user1
Password: (The password is not set.)
• Password used in this page is for accessing the web control window. (See page 67)
This password is different from the password set in page 57 for accessing a projector.
• The system locks for several minutes if an incorrect password is entered three times in succession.
• No password is set at time of purchase or after default settings are restored. Be sure to set a password at such times.
• Make sure the password is as hard to guess as possible.
• Change the password periodically.
• If you forget the password, perform [INITIALIZE] using the network menu of the projector (See page 59) and set a password
again using the <Change password> window on the WebBrowser. (See page 67)
• Matsushita Electric Industrial Co., Ltd. and its affiliated companies never directly ask customers for their password.
Do not give out your password even if directly asked by a third-party representing themselves as Matsushita Electric Industrial
Co., Ltd.
• The top window may not appear depending on the WebBrowser. In this case start up WebBrowser again, or press the [Ctrl] +
[R] keys for example to update the screen.
• Connection cannot be made while the WebBrowser is set to dial-up network. Cancel the dial-up network setting.
• It may take some moments for WebBrowser to start up.
