35
Various projection methods
(cont.)
Press the [MULTI-LIVE] button on the remote control to turn the projection screen
into a full screen display (the status when no index window is displayed).
If you press the [MULTI-LIVE] button once or twice when index windows are displayed on the projection screen, the
screen will switch over to a full screen display.
1
Check the status indication on the launcher to make sure that transmission is
possible (check that the green lamp is lit).
2
Click [
] on the launcher.
The current computer screen is transmitted to the selected projector. In the live mode the projector is occupied by a
single computer, so operations from other computers are not possible.
Picture quality or other options can be set on the <Option> window by clicking [
] on the launcher.
3
Quitting live mode
Click [
] on the launcher again.
Connect a computer to a projector, and display the computer screen over the entire projection screen.
Live mode
• For presentations in live mode, the [PAGE
Ÿź
] buttons on the remote control will function in the same way as the computer’s
Page Up and Page Down keys. (When using “Presenter View” of “PowerPoint”, the [PAGE
Ÿź
] buttons of the remote control
correspond to Back space key and Space key.) This means that if you run a computer application that supports the Page Up
and Page Down keys, the presentation screen can be changed using the remote control.
• Some portions of images are not projected under some applications (MS Office Assistant, IME Bar, animation and locus of the
mouse cursor, and others).
• If the connection error occurs during projection, the message [Stop “Live mode”] will appear, then restart projection by clicking
launcher buttons.
• Set the [LIVE MODE CUT IN] of the unit to [ON] in advance to enable a different computer to interrupt and project images in
live mode. (See page 58)
