manualshive.com logo in svg

Panasonic PT-FRZ55, Operating Instructions Manual

Share
Download
Panasonic PT-FRZ55 Operating Instructions Manual Download Page 39

Chapter 3 

 

Basic Operations — Switching on/off the projector

ENGLISH - 39

Switching on/off the projector

Connecting the power cord

Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being 

removed easily.

Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord.
Use the power cord matching with the power supply voltage and the shape of the outlet.
For details of power cord handling, refer to “Read this first!” (

x

 page 5).

How to attach the power cord

1) 

Check the shapes of the <AC IN> terminal on the side of the projector and the power cord connector, 

and insert the connector completely in the correct direction (until you hear the side tabs click in 

place).

How to remove the power cord

1) 

Confirm that the <MAIN POWER> switch on the side of the projector is on the <OFF> side, and remove 

the power plug from the outlet.

2)  Remove the power cord connector from the <AC IN> terminal of the projector while pressing the side 

tabs.

Power indicator

Indicate the status of the power. Check the status of the power indicator <ON (G)/STANDBY (R)> before operating 

the projector.

Power indicator <ON (G)/STANDBY (R)>

Summary of Contents for PT-FRZ55



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands