Panasonic PT-FRZ55 Operating Instructions Manual Download Page 141

Page: 141 / 194

Chapter 5

Operations — Web control function

ENGLISH - 141

Web control function

Following operation is possible from a computer using the web control function.

Setting and adjustment of the projector

Display of the projector status

Sending E-mail messages when there is a problem with the projector

The projector supports “Crestron Connected”, and the following application software of Crestron Electronics, Inc.

can be used.

RoomView Express

Crestron Fusion

Note

Communication with an E-mail server is required to use the E-mail function. Confirm that the E-mail can be used beforehand.

“Crestron Connected” is a system of Crestron Electronics, Inc. that collectively manages and controls devices on multiple systems

connected to a network using a computer.

For details of “Crestron Connected”, refer to the website of Crestron Electronics, Inc. (English only)

URL https://www.crestron.com

To download “RoomView Express”, go to the website of Crestron Electronics, Inc. (English only)

URL https://www.crestron.com/en-US/resources/get-roomview

Computer that can be used for setting

To use the web control function, a web browser is required. Confirm that the web browser can be used in advance.

Compatible browser

Windows

Internet Explorer 11.0

Microsoft Edge

Mac OS

Safari 10.0/11.0/12.0/13.0

iOS

Safari (version equipped with iOS 10.0, iOS 11.0, iOS12.0 and iOS13.0)

Android

Google Chrome (version equipped with Android 6.0/7.0/8.0/9.0/10.0)

Accessing from the web browser

1) Start up the web browser on the computer.
2) Enter the IP address set on the projector into the URL entry field of the web browser.

If the user name and password of the administator account have been set on the initial setting screen

(

page 46) or on the [NETWORK] menu

→

[ADMINISTRATOR ACCOUNT] (

page 130) , proceed to

Step

The [Set up password] page is displayed if the administrator account has not been set.

In [User name], enter the user name of the administrator account.

The factory default setting of user name is "dispadmin".

In [Password], enter the password of the administrator account.

The password cannot be blank.

A password consisting of at least eight single-byte characters is recommended.

Summary of Contents for PT-FRZ55



































































































































































































Search results

Summary of Contents for PT-FRZ55

Reviews:

Brands by name

Popular brands

Panasonic PT-FRZ55, Operating Instructions Manual

Search results

Summary of Contents for PT-FRZ55

Reviews:

Brands by name

Popular brands