manualshive.com logo in svg

Panasonic PT-FRZ55, Operating Instructions Manual

Share
Download
Panasonic PT-FRZ55 Operating Instructions Manual Download Page 110

Chapter 4 

 

Settings — [PROJECTOR SETUP] menu

110 - ENGLISH

[COMMAND]

Detailed settings of 

[COMMAND]

Description

[INPUT]

[COMPUTER1]

Switches the input to COMPUTER1.

[COMPUTER2]

*1

Switches the input to COMPUTER2.

[VIDEO]

Switches the input to VIDEO.

[HDMI1]

Switches the input to HDMI1.

[HDMI2]

Switches the input to HDMI2.

[DIGITAL LINK]

Switches the input to DIGITAL LINK.

[INPUT1] - [INPUT10]

*2

Switches the input to DIGITAL LINK, and switches the input of the 

Panasonic twisted-pair-cable transmitter to the specified input.

[OPERATING MODE]

[NORMAL]

Prioritizes luminance.

[ECO]

Controls the power to increase the life of the light source although 

the luminance is lower than that of [NORMAL].

[QUIET]

Prioritizes the operation with less noise although the luminance is 

lower than that of [NORMAL].

[LONG LIFE1]

Controls the power to increase the life of the light source although 

the luminance is lower than that of [ECO].

[LONG LIFE2]

Controls the power to increase the life of the light source although 

the luminance is even lower than that of [LONG LIFE1].

[LONG LIFE3]

Controls the power to increase the life of the light source to the 

maximum although the luminance is even lower than that of [LONG 

LIFE2].

[USER1]

Controls the power with the setting set in [USER1].

[USER2]

Controls the power with the setting set in [USER2].

[USER3]

Controls the power with the setting set in [USER3].

[IN STANDBY 

MODE(AUDIO)]

[OFF]

Stops the audio output during standby.

[ON]

Outputs the audio during standby.

[VOLUME]

[0] - [63]

Sets the volume.

*1  The [COMPUTER2] command is disabled when the [DISPLAY OPTION] menu 

→

 [COMPUTER IN/OUT] 

→

 [COMPUTER2 SELECT] is set to 

[COMPUTER1 OUT].

*2  When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input 

name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.

11)  Press the <ENTER> button.

 

f

The command is fixed and 

n

 is displayed at the left of the selected command.

 

f

After the command is fixed, press the <MENU> button to close the detailed setting screen.

12)  Press 

asqw

 to select [STORE], and press the <ENTER> button.

Note

 

f

To delete a command that has been already set, press the <DEFAULT> button on the remote control while the screen in Step 

5)

 is 

displayed, or select [DELETE] at the screen in Step 

6)

 and press the <ENTER> button.

 

f

If multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command 

number.

 

f

The operating time will be the local time. (

x

 page 115)

 

f

If an operation is executed with the remote control or control panel of the projector or with a control command before the command set in 

[SCHEDULE] is executed, the command set with the schedule function may not be executed.

[INITIAL STARTUP]

Set the startup method when the <MAIN POWER> switch is set to <ON>.

1)  Press 

as

 to select [INITIAL STARTUP].

2)  Press 

qw

 to switch the item.

 

f

The items will switch each time you press the button.

[LAST MEMORY]

Starts up the projector in the condition before the <MAIN POWER> switch is set to <OFF>.

[STANDBY]

Starts up the projector in standby.

[ON]

Starts projecting immediately.

[STARTUP INPUT SELECT]

Set the input when the projector is switched on to start projection.

Summary of Contents for PT-FRZ55



































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands