Settings
OPTION menu
E
NGLISH - 38
If you use the projector at high elevation, the
HIGHLAND
setting need to be
ON
to set the fan speed high. Press
I
H
to select the required option.
OFF
The fan speed is low.
ON
The fan speed is high.
You can use the 7 different test patterns to adjust the
focus of the image. See “Lens shift and positioning” on
page 18.
1. Press
ENTER
to display the test pattern 1.
2. Press
I
H
to select the required test pattern.
3. Adjust the focus with the
Focus lever
.
4. Press
MENU
or
RETURN
to return to the previous
menu, oar press repeatedly to escape the menu
mode.
You can perform more detailed setting in various items.
J
OSD DESIGN
You can change the background colour of the
menu. Press
I
H
to select the required option.
J
SXGA MODE
You can switch the setting between
SXGA
and the
larger setting,
SXGA+
. Press
I
H
to select the
required option.
J
XGA MODE
You can switch the setting between
XGA
and the
wider setting,
WXGA
. Press
I
H
to select the
required option.
J
BLACKBOARD
You can exclude the
BLACKBOARD
in menu
items of
PICTURE MODE
in
PICTURE
menu.
Press
I
H
to select the required option.
ON
Include the
BLACKBOARD
in menu
items.
OFF
Exclude the
BLACKBOARD
in menu
items.
J
BACK COLOUR
You can choose a
BLUE
or
BLACK
screen for
when the projector is idle. Press
I
H
to select the
required option.
J
VOLUME
You can adjust the volume of the built-in monaural
speaker and
VARIABLE AUDIO OUT
terminal.
I
Decrease
H
Increase
J
AUDIO BALANCE
You can adjust to hear the sound played equally
through both right and left external stereo
speakers, or shift the balance so more sound plays
through the left or right side.
I
More sound plays through the left
side
H
More sound plays through the right
side
J
INITIALISE ALL
You can reset all of the customised settings to the
factory defaults except
NETWORK
,
LAMP
RUNTIME
and
FILTER REMAINING
menu
settings.
You can reset all of the customised settings to the
factory defaults except
LAMP RUNTIME
and
FILTER REMAINING
menu settings.
1. Press the
ENTER
button
2. Turn off the projector by pressing the
POWER
button.
3. Switch off the
MAIN POWER
button to reset the
projector.
4. The minimum required setting screen will be
displayed.
See “Minimum required setting screen” on page 12.
HIGHLAND
NOTE:
• At 1 400 m (4 593 ft) above sea level, the setting must
be
ON
.
• The loudness of fan noise depends on the
HIGHLAND
setting.
TEST PATTERN
NOTE:
• When the projector and/or the screen is tilted, adjust
the focus at the centre of the image. The upper and
lower edge might be out of focus.
• When the image is distorted in keystone, adjust the
KEYSTONE
in
POSITION
menu.
DETAILED SETUP
TYPE1
Semi transparent black
TYPE2
Solid blue
TYPE3
Semi transparent dark blue
