Panasonic PT-F100E Operating Instructions Manual Download

Page: 22 / 56

NGLISH - 22

asi
c Op

eration

Switching the projector on/off

Connecting

1. Make sure the shape

of the mains plug and
the

AC IN

connector

on the back of the
projector match, then
push the plug all the way in.

2. Connect the

Mains lead

to a mains socket.

Disconnecting

1. Make sure the

MAIN POWER

is switched off and

unplug the

Mains lead

from the mains socket.

2. Hold the plug and unplug the

Mains lead

from the

AC IN

connector on the back of the projector.

Direct power off function

You can disconnect the

Mains lead

from the

projector or switch off the

MAIN POWER

button

while projecting or soon after projecting. The
internal lamp cooling fan will keep operating by the
internal power supply.

Direct power on function

If you activate the

DIRECT POWER ON

, you can

start the projection only with connecting the

Mains

lead

or switching on the

MAIN POWER

. See

“DIRECT POWER ON” on page 37.

Mains lead

NOTE:

• If the projector is switched on again while the internal

cooling fan is still operating by the internal power
supply, it may take a while to start the projection.

NOTE:

• Do not use other than a provided

Mains lead

• Ensure all the input devices are connected and turned off before connecting the

Mains lead

• Do not force the connector as this may damage the projector and/or the mains lead.
• Dirt or dust build-up around plugs may cause fire or electrical hazards.
• Switch off the power to the projector when not in use.

POWER indicator

Indicator status

Status

No illumination or flashing

The

MAIN POWER

is switched off.

RED

Lit

The

MAIN POWER

is switched on and the projector is in standby.

When the

LAMP

TEMP

indicator is flashing, the

POWER

indicator will

not be lit.

Flashing

Network connection is ready while the

POWER

is turned off.

GREEN

Flashing

The

POWER

is switched on and the projector is getting ready to project.

Lit

The projector is ready to project.

ORANGE

Lit

The

POWER

is switched off and the projector is cooling the lamp.

Flashing

The

POWER

is switched on again when cooling the lamp and recovering

to projection mode. Recovery may take a while.

NOTE:

• If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take

a while to start the projection.

• The electric consumption in standby mode is 3 W.

POWER

indicator

Summary of Contents for PT-F100E
























































Search results

Summary of Contents for PT-F100E

Reviews:

Related manuals for PT-F100E

Brands by name

Popular brands

Panasonic PT-F100E, Operating Instructions Manual

Search results

Summary of Contents for PT-F100E

Reviews:

Related manuals for PT-F100E

Brands by name

Popular brands