Chapter 4
Settings — [DISPLAY OPTION] menu
ENGLISH - 85
2) Press the <ENTER> button.
f
The
[SHUTTER SETTING]
screen is displayed.
3) Press
as
to select [SHUT-OFF].
4) Press
qw
to switch the item.
[KEEP CURRENT STATE]
When the projector is switched off, the projector turns into standby with the shutter status as is.
[OPEN]
When the projector is switched off, the projector turns into standby with the shutter left opened.
[CLOSE]
When the projector is switched off, the projector turns into standby with the shutter left closed.
[P-TIMER]
Set and operate the presentation timer function.
Setting the mode
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select [MODE].
4) Press
qw
to switch the item.
[COUNT UP]
Displays the elapsed time since the count was started.
[COUNT DOWN]
Displays the remaining time of the time set by [TIMER].
Setting the timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select [TIMER].
4) Press
qw
to set the time.
f
The time can be set in 1-minute increments from 1 to 180 minutes.
f
The factory default value is 10 minutes.
Note
f
[TIMER] is enabled when [MODE] is set to [COUNT DOWN].
Using the presentation timer
1) Press
as
to select [P-TIMER].
2) Press the <ENTER> button.
f
The
[P-TIMER]
screen is displayed.
3) Press
as
to select the item, and press the <ENTER> button.
[START]
The count is started.
[STOP]
The count is stopped.
[RESTART]
The count is resumed.
[RESET]
The count is reset.
f
When [START] or [RESTART] is selected, the elapsed time or the remaining time is displayed at the bottom right of the projected
image.
f
When [STOP] is selected, the elapsed time or the remaining time when the count was stopped is displayed at the bottom right of the
projected image.
f
When [RESET] is selected, proceed to Step
4)
.
