Chapter 1
Preparation — About your projector
26 - ENGLISH
About your projector
Remote control
1
3
2
4
5
8
7
6
6
9
10
16
17
18
19
15
11
13
20
22
21
24
23
12
14
25
26
Front
Top
Bottom
1
Power standby <
v
> button
Sets the projector to the state where the projector is switched
off (standby mode) when the <MAIN POWER> switch on the
projector is set to <ON> and in the projection mode.
2
Power on <
b
> button
Starts projection when the <MAIN POWER> switch on the
projector is set to <ON> when the power is switched off
(standby mode).
3 Remote control indicator
Flashes if any button in the remote control is pressed.
4
Lens (<FOCUS>, <ZOOM>, <SHIFT>) buttons
Adjusts the Projection Lens. (
x
page 51)
5 <MENU> button/<ENTER> button/
asqw
button
Used to navigate through the menu screen. (
x
page 59)
6 <VOL-
> button/<VOL+> button
Adjusts the volume of the built-in speaker or audio output.
(
x
page 54)
7
<ON SCREEN> button
Switches on (display)/off (hide) the on-screen display function.
(
x
page 54)
8
Input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>,
<VIDEO>, <DisplayPort>, <HDMI>) buttons
Switches the input signal to project. (
x
page 53)
9 Number (<0> - <9>) buttons
Used when the system uses multiple projectors.
Used to input ID numbers or passwords.
10 <ID ALL> button
Used to simultaneously control all the projectors with a single
remote control when using multiple projectors. (
x
page 30)
11
<ECO> button
Displays the setting screen relating to ECO management.
(
x
pages 57, 89)
12 <SHUTTER> button
Used when temporarily turning off the image and audio.
(
x
page 53)
13
<AUTO SETUP> button
Automatically adjusts the image display position while the
image is projected.
[PROGRESS] is displayed on the screen while adjusting
automatically. (
x
page 55)
14
<ID SET> button
Sets the ID number of the remote control to use for a system
using multiple projectors. (
x
page 30)
15 <KEYSTONE> button
Displays the [KEYSTONE] menu. (
x
pages 55, 72)
16
<FUNCTION> button
Assigns a frequently used operation as a shortcut button.
(
x
page 57)
17
<FREEZE> button
Used when pausing the image and turning off the audio.
(
x
page 54)
18
<P-TIMER> button
Operates the presentation timer function. (
x
page 55)
19 <STATUS> button
Displays the status of the projector. (
x
pages 57, 96)
20 <DEFAULT> button
Resets the content of the sub-menu to the factory default.
(
x
page 60)
21 <D.ZOOM> button
Displays the [DIGITAL ZOOM] menu. (
x
pages 56, 86)
22 <MUTE> button
Used when temporarily turning off the audio. (
x
page 54)
23 <ASPECT> button
Switches the aspect ratio of the image. (
x
page 56)
24 <P IN P> button
Switches the [P IN P] setting. (
x
page 56)
25
Remote control signal transmitter
26
Remote control wired terminal
This is the terminal to connect to the projector by a cable when
used as a wired remote control. (
x
page 31)
Attention
f
Do not drop the remote control.
