Panasonic PT-EW730Z Operating Instructions Manual Download Page 155

Page: 155 / 157

Chapter 6

Appendix — Precautions for Ceiling Mount Bracket

ENGLISH - 155

Precautions for Ceiling Mount Bracket

When installing the projector to a ceiling, be sure to use the specified optional Ceiling Mount Bracket (Model No.: ET-PKE200H (for High

Ceilings), ET-PKE200S (for Low Ceilings), ET-PKE200B (Projector Mount Base)). Ceiling Mount Bracket (Model No.: ET-PKE200H (for High

Ceilings), ET-PKE200S (for Low Ceilings)) is used in combination with Ceiling Mount Bracket (Model No.: ET-PKE200B (Projector Mount

Base)).

When installing the projector, attach the drop-prevention wire supplied with the Ceiling Mount Bracket (Model No.: ET-PKE200B (Projector

Mount Base)).

Ask a qualified technician to do the installation work such as mounting the projector on the ceiling.

Panasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by

Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.

Unused products must be removed promptly by a qualified technician.

Use a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use electric screwdrivers or

impact screwdrivers.

Read the Installation Instructions for the Ceiling Mount Bracket for details.

The model numbers of accessories and optional accessories are subject to change without prior notice.

Bottom view

Model No. of Ceiling Mount Bracket: ET-PKE200H (for High Ceilings)

ET-PKE200S (for Low Ceilings)

12 mm (15/32")

Torque: 4 ± 0.5 N·m

ET-PKE200B (Projector Mount Base)

Summary of Contents for PT-EW730Z






























































































































































Search results

Summary of Contents for PT-EW730Z

Reviews:

Related manuals for PT-EW730Z

Brands by name

Popular brands

Panasonic PT-EW730Z, Operating Instructions Manual

Search results

Summary of Contents for PT-EW730Z

Reviews:

Related manuals for PT-EW730Z

Brands by name

Popular brands