92 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
[NETWORK] menu
Select [NETWORK] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
r
f
After selecting the item, press
asqw
to set.
[NETWORK SETUP]
Perform the initial setting of the network before using the network function.
1)
Press
as
to select [NETWORK SETUP].
2)
Press the <ENTER> button.
r
f
The
[NETWORK SETUP]
screen is displayed.
3)
Press
as
to select an item, and change
the settings according to the operation
instructions of the menu.
4)
Press
as
to select [STORE], and press the
<ENTER> button.
5)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
r
r
[NETWORK SETUP]
[PROJECTOR NAME]
Change the setting when using a DHCP server.
[DHCP]
Set the item to [ON] when using a DHCP server to automatically acquire the IP address. Set to [OFF] when
not using a DHCP server.
[IP ADDRESS]
Enter the IP address when not using a DHCP server.
[SUBNET MASK]
Enter the subnet mask when not using a DHCP server.
[DEFAULT GATEWAY]
Enter the default gateway address when not using a DHCP server.
[STORE]
Save the current network settings.
Note
r
f
When using a DHCP server, confirm that the DHCP server is running.
r
f
Consult your network administrator regarding the IP address, subnet mask, and default gateway.
[NETWORK CONTROL]
Set up the control method of the network.
1)
Press
as
to select [NETWORK CONTROL].
2)
Press the <ENTER> button.
r
f
The
[NETWORK CONTROL]
screen is displayed.
3)
Press
as
to select an item, then press
qw
to
change the setting.
4)
Press
as
to select [STORE], and press the
<ENTER> button.
5)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.