60 - ENGLISH
Chapter 4 Settings — [POSITION] menu
[POSITION] menu
Select [POSITION] from the main menu, and select the item from the sub-menu.
Refer to “Navigating through the menu” (
x
page 51) for the operation of the menu screen.
r
f
After selecting the item, press
asqw
to adjust.
[SHIFT]
You can move the image position vertically or horizontally if the image position projected on the screen is shifted even when the relative
position of the projector and the screen is installed correctly.
1)
Press
as
to select [SHIFT].
2)
Press the <ENTER> button.
r
f
The
[SHIFT]
screen is displayed.
3)
Press
asqw
to adjust the position.
r
r
Adjustment details
Orientation
Operation
Adjustment
Vertical (up and down)
adjustment
Press
a
.
The picture position moves up.
Press
s
.
The picture position moves down.
Horizontal (right and left)
adjustment
Press
w
.
The picture position moves to the right.
Press
q
.
The picture position moves to the left.
[ASPECT]
You can switch the aspect ratio of the image.
The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] first. (
x
page 69)
1)
Press
as
to select [ASPECT].
2)
Press
qw
or the <ENTER> button.
r
f
The
[ASPECT]
individual adjustment screen is displayed.
3)
Press
qw
to switch [ASPECT].
r
f
The setting will change among [DEFAULT]
*1
/[VID AUTO]
*2
/
[AUTO]
*3
, [S1 AUTO]
*4
, [VID AUTO(PRI.)]
*5
, [THROUGH], [16:9],
[4:3], [H FIT], [V FIT], and [HV FIT] each time you press the
button.
*1 Not during VIDEO/S-VIDEO (NTSC)/RGB (480i, 480p) signal input
*2
Only during VIDEO/S-VIDEO (NTSC) signal input
*3 Only during RGB (480i, 480p) signal input
*4
Only during S-VIDEO (NTSC) signal input
*5 This is the factory default setting during S-VIDEO (NTSC) input.
The settings will rotate from [VID AUTO(PRI.)].
