90 - ENGLISH
Chapter 4 Settings — [SECURITY] menu
2)
Press
qw
to switch [DISPLAY SETTING].
r
f
The setting will change among [OFF], [TEXT], and[USER
LOGO] each time you press the button.
r
r
[DISPLAY SETTING]
[OFF]
The text display is disabled.
[TEXT]
The text display is enabled.
[USER LOGO]
The picture registered by the user is projected.
Note
r
f
To create the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required.
[TEXT CHANGE]
Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].
1)
Press
as
to select [TEXT CHANGE].
2)
Press the <ENTER> button.
r
f
The
[TEXT CHANGE]
screen is displayed.
3)
Press
asqw
to select the text, and press the
<ENTER> button to enter the text.
r
f
Maximum 22 characters can be input.
4)
Press
asqw
to select [OK], and press the
<ENTER> button.
r
f
The text is changed.
[MENU LOCK]
Display the menu with the <MENU> button, and set whether to enable menu operations.
1)
Press
as
to select [MENU LOCK].
2)
Press
qw
to switch [MENU LOCK].
r
f
The setting will change between [OFF] and [ON] each time you
press the button.
r
r
[MENU LOCK]
[OFF]
Cancels the lock on menu operations.
[ON]
Locks menu operations.
Note
r
f
After setting [MENU LOCK] to [ON], if the wrong password is input, the <MENU> button cannot be operated.
r
f
At the time of purchase or after [ALL USER DATA] initialization, [MENU LOCK] is set to [OFF].
r
f
The lock release is maintained until the projector enters standby.
[MENU LOCK PASSWORD]
Change the menu lock password.
1)
Press
as
to select [MENU LOCK
PASSWORD].
2)
Press the <ENTER> button.
r
f
The
[MENU LOCK PASSWORD]
screen is displayed.
3)
Press
asqw
to select the text, and press the
<ENTER> button to enter the text.
r
f
Maximum 16 characters can be input.
4)
Press
asqw
to select [OK] and press the
<ENTER> button.
r
f
To cancel, select [CANCEL].
Attention
r
f
The initial password when used for the first time or after initializing all the user data is “AAAA”.
r
f
Change the password periodically that is hard to guess.
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote control.
1)
Press
as
to select [CONTROL DEVICE
SETUP].
2)
Press the <ENTER> button.
r
f
The
[CONTROL DEVICE SETUP]
screen is displayed.
