ENGLISH - 19
Chapter 1 Preparation — Start-up display
Start-up display
The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [INITIALIZE] – [ALL
USER DATA] (
x
page 84) is executed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
Note
r
f
When the projector is used for the first time, you may be required to adjust the focus, zoom, and shift to display the menu screen clearly.
Refer to “Adjusting the focus, zoom, and shift” (
x
page 45) for details.
Initial setting (display language)
Select the language to show on the screen. (
x
page 67)
1)
Press
as
to select the display language.
(17(5
,1,7,$/6(77,1*
3/($6(6(/(&7/$1*8$*(
6(/(&7
6(7
2)
Press the <ENTER> button to proceed to the
initial setting.
Initial setting (projector setup)
Set each item.
1)
Press
as
to select an item.
2)
Press
qw
to switch the setting.
(17(5
㧦
6:,7&+72+,*+$/7,78'(02'(21
,)29(5P)W
0(186(/(&7
&+$1*(
6(7
,1,7,$/6(77,1*
352-(&7,210(7+2'
&22/,1*&21',7,21
6&5((1)250$7
6&5((1326,7,21
+,*+$/7,78'(02'(
)5217)/225
)/2256(77,1*
2))
r
f
Refer to the following pages for details.
[PROJECTION METHOD] (
x
page 75)
[COOLING CONDITION] (
x
page 76)
[SCREEN FORMAT] (
x
page 69)
[SCREEN POSITION] (
x
page 69)
[HIGH ALTITUDE MODE] (
x
page 76)
3)
Press the <ENTER> button.
r
f
Confirm the setting value to complete the initial setting.
Note
r
f
If you press the <MENU> button in the initial setting (projector setup) screen, you can go back to the initial setting (display language)
screen.
