Panasonic PT-D4000U Series Operating Instructions Manual Download | Manualshive

Page: 3 / 68

background image

3

WARNING:

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

– Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION:

To assure continued compliance, use only shielded interface cables when

connecting to computer or peripheral devices. Any unauthorized changes or

modifications to this equipment could void the user’s authority to operate.

NOTE:

This product has a High Intensity Discharge (HID) lamp that contains mercury.

Dispose may be regulated in your community due to environmental considerations.

For disposal or recycling information, please contact your local authorities,

or the Electronic Industries Alliance: http://www.eiae.org

Declaration of Conformity

Model Number:

PT-D4000U

Trade Name:

Panasonic

Responsible Party:

Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094

Telephone Number:

888-411-1996

Email:

[email protected]

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

WARNING:

Not for use in a computer room as defined in the Standard for the Protection of Electronic

Computer/Data Processing Equipment, ANSI/NFPA 75.

«
1
2
3
4
5
...
»

Summary of Contents for PT-D4000U Series





































































Reviews:

No comments

Related manuals for PT-D4000U Series

Brand: Yaber Pages: 101

Brand: Miroir Pages: 14

SCREEN Standard

Brand: FART PRODUKT Pages: 5

Brand: Mitsubishi Pages: 5

Brand: Panasonic Pages: 323

Brand: Panasonic Pages: 240

Brand: EluneVision Pages: 4

Brand: Hitachi Pages: 92

Brand: Hitachi Pages: 162

Brand: Hitachi Pages: 99

Brand: Hitachi Pages: 72

50V720 - 50" Rear Projection TV

Brand: Hitachi Pages: 72

Brand: Hitachi Pages: 60

Brand: Hitachi Pages: 80

Brand: Hitachi Pages: 88

Brand: Hitachi Pages: 84

Brand: Hitachi Pages: 68

Brand: Hitachi Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands