[OPTION] menu
ENGLISH
- 75
Settings
[TRIGGER 1/2 SETTING]
You can set the function for each trigger terminal.
The trigger terminals for this projector are used as
both the input/output terminal for the trigger function
and the output terminal for the external 3D IR
Transmitter (optional accessory). This is selected with
a menu.
Attention
You can connect a maximum of two external 3D IR
z
Transmitter (optional accessory).
Make sure the <MAIN POWER> switch of the projector
z
is turned <OFF> before a cable is connected to or
disconnected from a trigger terminal.
[OUTPUT]
■
In conjunction with projector operation set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu, a trigger
output signal is sent to an external device with a trigger
terminal to enable control.
[INPUT]
■
Receipt of a trigger input signal from an external device
enables control of projector operation setup in the
[TRIGGER 1 SETTING]/[TRIGGER 2 SETTING] menu.
ON-SCREEN DISPLAY
BACK COLOUR
STARTUP LOGO
AUTO SEARCH
HDMI SIGNAL LEVEL
FRAME RESPONSE
PROJECTION METHOD
TRIGGER 1 SETTING
TRIGGER 2 SETTING
SLEEP
HIGH ALTITUDE MODE
LAMP POWER
FUNCTION BUTTON
VIERA LINK SETTINGS
BLUE
ON
ON
NORMAL
NORMAL
FRONT/DESK
OFF
OFF
OFF
OFF
NORMAL
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
1/2
Use the ▲▼ buttons to select [TRIGGER
1)
1 SETTING] or [TRIGGER 2 SETTING] and
press the <ENTER> button.
The [TRIGGER SETTING] menu is displayed.
z
TRIGGER 1 SETTING
OFF
OUTPUT
POWER ON
SELECT LENS MEMORY 1
SELECT LENS MEMORY 2
SELECT LENS MEMORY 3
SELECT LENS MEMORY 4
SELECT LENS MEMORY 5
SELECT LENS MEMORY 6
BLANK
DELAY TIME
INPUT
POWER ON/OFF
3D SHUTTER OUT
SELECT 4:3 ASPECT
SELECT 16:9 ASPECT
SELECT S16:9 ASPECT
SELECT JUST ASPECT
SELECT ZOOM ASPECT
SELECT H-FIT ASPECT
SELECT V-FIT ASPECT
RS-232C COMMAND LINK
0 SEC.
BLANK
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
Press the ▲▼◄► buttons to select
2)
the input/output function and press the
<ENTER> button.
Function settings
z
[OFF]
Unable to transmit the
trigger output signal. Does
not function even if trigger
input signal is received.
(Trigger input signal can
be received.)
An external 3D IR
Transmitter (optional
accessory) will not
operate even if
connected.
[3D SHUTTER
OUT]
Select this for connecting
and use of an external 3D
IR Transmitter (optional
accessory).
Note
Read the operating instructions for the external 3D IR
z
Transmitter (optional accessory) when using a 3D IR
Transmitter.
Output
z
[POWER ON]
[SELECT 4:3
ASPECT]
[SELECT LENS
MEMORY 1]
[SELECT 16:9
ASPECT]
[SELECT LENS
MEMORY 2]
[SELECT S16:9
ASPECT]
[SELECT LENS
MEMORY 3]
[SELECT JUST
ASPECT]
[SELECT LENS
MEMORY 4]
[SELECT ZOOM
ASPECT]
[SELECT LENS
MEMORY 5]
[SELECT H-FIT
ASPECT]
[SELECT LENS
MEMORY 6]
[SELECT V-FIT
ASPECT]
[BLANK]
[RS-232C COMMAND
LINK]
When the item which is set in the [TRIGGER
1 SETTING]/[TRIGGER 2 SETTING] menu is
chosen or executed in the projector, 12 V is output
from a trigger terminal.
Note
When [AUTO] is selected in the [ASPECT] menu of
z
[POSITION], video is automatically displayed using either
4:3 or 16:9 aspect ratio depending on the input signal,
so if this aspect ratio matches the settings made in
[TRIGGER 1 SETTINGS] or [TRIGGER 2 SETTINGS] 12
V is output.
