[PICTURE] menu
ENGLISH
- 47
Settings
c. Adjusting the output level
To adjust the output level from the present setting,
z
press ▲ ▼ continuously until it reaches to your
desired level. (It may be moved up and down.)
Output level can be adjusted for each color on
z
the [R/G/B ADJUST] screen.
Ex. Press ▲ in the [Y ADJUST] screen and move the
selected point upward.
Y ADJUST
POINT
0%
50%
100%
INPUT
OUTPUT
INPUT
OUTPUT
50%
+10
5
Setting range: -252 to +252
Y ADJUST
POINT
0%
50%
100%
INPUT
OUTPUT
INPUT
OUTPUT
50%
+30
5
MOVE
UP
d. Changing the adjustment by different color
types
The settings change as follows each time the
z
<ENTER> button is pressed.
Y ADJUST
R ADJUST
B ADJUST
G ADJUST
You can also switch each different color adjustment
menu through the [GAMMA ADJUSTMENT] menu.
Select your required color adjustment ([Y ADJUST],
[R ADJUST], [G ADJUST], [B ADJUST]) with ▲ ▼
in the [GAMMA ADJUSTMENT] menu and press the
<ENTER> button.
GAMMA ADJUSTMENT
ADJUSTMENT MODE
GAMMA HIGH
GAMMA MID
GAMMA LOW
POINT
Y ADJUST
R ADJUST
G ADJUST
B ADJUST
INITIALIZE
ADVANCED
5
PICTURE
POSITION
LANGUAGE
3D SETTINGS
LENS CONTROL
OPTION
R ADJUST
POINT
0%
50%
100%
INPUT
OUTPUT
INPUT
OUTPUT
50%
+10
5
e. Setting the output levels back to the default
setting
To set the output level on the selected point back
z
to the default setting “0”, press the <DEFAULT>
button on the remote control.
Note
Individual input levels cannot be set back to their default
z
settings by pressing the <DEFAULT> button. Press
▲ ▼
to move back themselves if needed.
