35
Basic Operation
Channel and Program Tuning
Channel and Program tuning in digital television differs from conventional television. With DTV, many
programs can exist within a single 6 MHz channel. These channels behave as sub-channels within a single
channel. When tuning to a digital channel, the Projection Display will also tune to a program and will indicate
the channel and program in the on-screen Channel Banner display.
In order to select channels properly, Auto Scan must be performed (refer to pages 30-31).
Follow the procedure below to directly enter the channel number using the Remote
Control number keys.
1
1
Press the number keys on the Remote Control to
enter the Channel number. Press OK.
The following is an example of tuning to channel 15.
If tuning a digital channel and your channel contains
more than one program, press PROG and enter the
program (1, 2, 3 etc.) using the number keys. Press OK.
The following is an example of tuning to channel 15-1.
Direct Tuning Example
Step
Action
Channel Banner Display
1
Press 1
1
2
Press 5
15
3
Press -
15-
4
Press 1
15-1
5
Press OK
15-1
Direct Tuning Method
PROG
Select analog channel
2
Select digital channel
2
4
3
Step
Action
Channel Banner Display
1
Press 1
1
2
Press 5
15
3
Press OK
15
Direct Tuning Example
Projection display operation
