Panasonic POVCAM AG-MDR25P Operating Instructions Manual Download

Page: 239 / 261

- 239 -

Recording error

Status indicator

It flashes once per second.

On-screen display

Meaning of the warning

A recording error or recording circuit
setting error has occurred.

Recording/playback

The recording may either continue or
stop.

Solution

Turn off and on this unit. If the warning
persists, consult your dealer.

Card error

Status indicator

On-screen display

[

] is displayed.

Meaning of the warning

An SD card error has occurred during
recording or playback.

Recording/playback

The operation stops.

Solution

Replace the SD card.

The battery will be

depleted soon

Status indicator

On-screen display

The message [CHANGE THE BATTERY.]
is displayed and

flashes red.

Meaning of the warning

The battery will be depleted soon.

Recording/playback

The operation continues.

Solution

Charge or replace the battery as needed.
Connect the AC adaptor to cancel the
warning.

The card is nearly full

Status indicator

On-screen display

The remaining recordable time flashes
red. (When it is less than 1 minute)

Meaning of the warning

The SD card is almost out of space.

Recording/playback

The recording continues.

Solution

Delete unnecessary clips or use a new SD
card as needed.

The cooling fan has

stopped

Status indicator

It flashes twice per second.

On-screen display

Meaning of the warning

A cooling fan error has stopped the
cooling fan.

Recording/playback

The operation stops and this unit turns off
automatically.

Solution

Check to see if the air inlet or outlet is
blocked. If the warning persists, consult
your dealer.

AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 239 ページ２０１７年５月２２日　月曜日　午後６時１４分

Summary of Contents for POVCAM AG-MDR25P






































































































































































































































































Search results

Summary of Contents for POVCAM AG-MDR25P

Reviews:

Related manuals for POVCAM AG-MDR25P

Brands by name

Popular brands

Panasonic POVCAM AG-MDR25P, Operating Instructions Manual

Search results

Summary of Contents for POVCAM AG-MDR25P

Reviews:

Related manuals for POVCAM AG-MDR25P

Brands by name

Popular brands