- 152 -
(When [SYSTEM FREQ] is set to [50.00Hz])
Image quality
Select the image quality for H.264 images.
Setting value:
Factory settings:
Motion priority
≥
This setting is only enabled when [Transmission priority] is set to [Constant bit rate] or [Best effort].
Transmission type
Select the transmission format for H.264 images.
Setting value:
Factory settings:
Unicast port (AUTO)
≥
For explanation of number of maximum simultaneous access, refer to page
.
Image capture size
Frame rate
H.264 bit rate
3840
k
2160
25fps
51200kbps fixed
12.5fps
40960kbps fixed
5fps
32768kbps fixed
1920
k
1080
50fps
16384kbps to 24576kbps
5fps, 12.5fps, 25fps
1024kbps to 14336kbps
1280
k
720
50fps
3072kbps to 14336kbps
5fps, 12.5fps, 25fps
512kbps to 8192kbps
640
k
360
512kbps to 4096kbps
Motion priority
Mode giving priority to image motion.
Image quality priority
Mode giving priority to image quality.
Unicast port
(AUTO)
A maximum of 14 users can access a single Camera Head or Recorder at the same time.
When transmitting image/audio from a Camera Head or Recorder, [Unicast port (Image)] and
[Unicast port (Audio)] are automatically set.
We recommend selecting the [Unicast port (MANUAL)] setting when the port number transmitting
the H.264 images does not need to be fixed (e.g., during use within a network).
Unicast port
(MANUAL)
A maximum of 14 users can access a single Camera Head or Recorder at the same time.
When transmitting image/audio from a Camera Head or Recorder, it is necessary to set [Unicast
port (Image)] and [Unicast port (Audio)] manually.
When transmitting H.264 images via the Internet, configure a fixed transmission port for the
broadband router (hereafter referred to as “router”) (
). For details, refer to the operating
instructions for the router.
Multicast
An unlimited number of users can access a single camera at the same time.
When transmitting H.264 images via multicast, enter the [Multicast address], [Multicast port], and
[Multicast TTL/HOPLimit].
AG-MDR25PJ.EJ(DVQP1328ZA)_E.book 152 ページ ２０１７年５月２２日 月曜日 午後６時１４分
